Keebio Documentation
Search…
Website
blog
docs
3D-Printed Case Parts Installation
adding-rgb-underglow
bdn9-build-guide
bdn9-rev1.3-build-guide
bdn9-rev2-build-guide
BFO-9000
case-files
choc-stabs
chocopad-build-guide
Default Keymaps
dfu-on-pro-micro
dilly-build-guide
doc1
doc2
doc3
flashing-firmware
FoldKB
fourier-build-guide
glossary
iris-choc-build-guide
iris-led-fix
iris-middle-layer
iris-rev2-build-guide
Iris Rev. 3-5
Iris Rev. 6 Hotswap
Enabling Iris Rev. 6 VIA RGB Controls
laplace-build-log
Levinson Rev. 3
Lighting Options
Build Guide Info
mdx
nyquist-build-guide
nyquist-rev3-build-guide
Quefrency Rev. 4 Hotswap Build Guide
quefrency-rev1-build-guide
Quefrency/Sinc/KBO-5000
Remapping/Reprogramming your Keyboard
Reprogramming Encoders
reset-eeprom
schematics
Recommended Soldering Tools
standard-for-build-guides
stick-build-guide
Tenting Bolts Setup for Acrylic Middle Layer
Testing Your PCB
troubleshooting
VIA and QMK Firmware
VIA Usage Guide
viterbi-rev2-build-guide
wtf60-build-guide
faq
Powered By
GitBook
FoldKB
Due to the similarity of the FoldKB build to the Quefrency/Sinc/KBO-5000, see the build guide for that instead:
Quefrency/Sinc/KBO-5000 Build Guide
.
A specific build guide for the FoldKB will be provided later here.
Build Tutorial Video by Keebio
Note on Left 1.5u Thumb Key on Left Half
For the Rev. 1.0 PCB, a trace is missing on the left 1.5u thumb key for the left half as marked here:
To fix this, after solder all of the switches, add a jumper wire between these two pins as shown below:
Previous
flashing-firmware
Next
fourier-build-guide
Last modified
5mo ago
Copy link
Contents
Note on Left 1.5u Thumb Key on Left Half