Keebio Documentation
  • Website
  • docs
    • 3D-Printed Case Parts Installation
    • adding-rgb-underglow
    • BAMFK-1 Build Guide
    • bdn9-build-guide
    • bdn9-rev1.3-build-guide
    • bdn9-rev2-build-guide
    • BFO-9000
    • Breeze Rev. 1.3 Build Guide
    • case-files
    • Cepstrum Hotswap
    • Chiri CE
    • choc-stabs
    • chocopad-build-guide
    • Convolution Build Guide
    • Default Keymaps
    • dfu-on-pro-micro
    • dilly-build-guide
    • Elite-Pi Usage Guide
    • VIA Firmware Upgrade Procedure
    • Flashing Firmware
    • FoldKB
    • fourier-build-guide
    • glossary
    • Switch Installation for Pre-Built Hotswap Keyboards
    • Iris Aluminum Case Build Guide
    • Iris CE
    • iris-choc-build-guide
    • Iris Keyboard
    • iris-led-fix
    • Iris LM
    • iris-middle-layer
    • iris-rev2-build-guide
    • Iris Rev. 3-5
    • Iris Rev. 6-8 Hotswap
    • Enabling Iris Rev. 6 VIA RGB Controls & Encoder Mapping
    • Iris SE
    • laplace-build-log
    • Levinson Rev. 3
    • Lighting Options
    • Build Guide Info
    • nyquist-build-guide
    • nyquist-rev3-build-guide
    • Quefrency Rev. 4-6 Hotswap Build Guide
    • quefrency-rev1-build-guide
    • Quefrency/Sinc/KBO-5000 (Solder Version)
    • Remapping/Reprogramming your Keyboard
    • Reprogramming Encoders
    • Resetting/Clearing EEPROM
    • schematics
    • Sinc Rev. 3-4 Hotswap Build Guide
    • Recommended Soldering Tools
    • Stampy Usage Guide
    • standard-for-build-guides
    • stick-build-guide
    • Tenting Bolts Setup for Acrylic Middle Layer
    • Testing Your PCB
    • troubleshooting
    • VIA and QMK Firmware
    • VIA Usage Guide
    • viterbi-rev2-build-guide
    • Waterfowl Build Guide
    • WTF60
    • faq
      • Contact Info
      • Recommended Keycaps
      • main
      • miscellaneous
      • ordering
      • Products
      • Shipping
      • Switches and Sockets
      • Technical/Build Info
Powered by GitBook
On this page
  • LED
  • PCB
  • Rotary Encoder
  • Stabilizers
  • Standoffs
  • TRRS cable
  1. docs

glossary

Previousfourier-build-guideNextSwitch Installation for Pre-Built Hotswap Keyboards

Last updated 4 years ago

Woohoo! If you're looking here, you're going to learn some new words.

LED

Light-emitting diode. These are great if you want to jazz up your keyboard with .

PCB

"Printed Circuit Board" is what that stands for. This holds all the info that makes a keyboard work.

Rotary Encoder

This is a part that takes information to the computer from being pivoted left and right. With an attached knob, you'll be able to input some sliding scale info.

Stabilizers

Stabs, for short, provide support to a larger keycap.

Standoffs

These pieces attach to screws and allow space to be created between the keyboard pieces.

TRRS cable

This will let your split keyboard sides to talk with one another. The acronym stands for Tip Ring Ring Sleeve. Usually used for audio, but in the context, is needed to connect split keyboards.

dancing
lights