Keebio Documentation
  • Website
  • docs
    • 3D-Printed Case Parts Installation
    • adding-rgb-underglow
    • BAMFK-1 Build Guide
    • bdn9-build-guide
    • bdn9-rev1.3-build-guide
    • bdn9-rev2-build-guide
    • BFO-9000
    • Breeze Rev. 1.3 Build Guide
    • case-files
    • Cepstrum Hotswap
    • Chiri CE
    • choc-stabs
    • chocopad-build-guide
    • Convolution Build Guide
    • Default Keymaps
    • dfu-on-pro-micro
    • dilly-build-guide
    • Elite-Pi Usage Guide
    • VIA Firmware Upgrade Procedure
    • Flashing Firmware
    • FoldKB
    • fourier-build-guide
    • glossary
    • Switch Installation for Pre-Built Hotswap Keyboards
    • Iris Aluminum Case Build Guide
    • Iris CE
    • iris-choc-build-guide
    • Iris Keyboard
    • iris-led-fix
    • Iris LM
    • iris-middle-layer
    • iris-rev2-build-guide
    • Iris Rev. 3-5
    • Iris Rev. 6-8 Hotswap
    • Enabling Iris Rev. 6 VIA RGB Controls & Encoder Mapping
    • Iris SE
    • laplace-build-log
    • Levinson Rev. 3
    • Lighting Options
    • Build Guide Info
    • nyquist-build-guide
    • nyquist-rev3-build-guide
    • Quefrency Rev. 4-6 Hotswap Build Guide
    • quefrency-rev1-build-guide
    • Quefrency/Sinc/KBO-5000 (Solder Version)
    • Remapping/Reprogramming your Keyboard
    • Reprogramming Encoders
    • Resetting/Clearing EEPROM
    • schematics
    • Sinc Rev. 3-4 Hotswap Build Guide
    • Recommended Soldering Tools
    • Stampy Usage Guide
    • standard-for-build-guides
    • stick-build-guide
    • Tenting Bolts Setup for Acrylic Middle Layer
    • Testing Your PCB
    • troubleshooting
    • VIA and QMK Firmware
    • VIA Usage Guide
    • viterbi-rev2-build-guide
    • Waterfowl Build Guide
    • WTF60
    • faq
      • Contact Info
      • Recommended Keycaps
      • main
      • miscellaneous
      • ordering
      • Products
      • Shipping
      • Switches and Sockets
      • Technical/Build Info
Powered by GitBook
On this page
  1. docs

iris-led-fix

PreviousIris KeyboardNextIris LM

Last updated 4 years ago

For the 2.1b and 2.4 PCBs, there's a missing trace/via on one of the pads for the MOSFET of the right half (the one shown here). To resolve this, solder the MOSFET to the other side of the board, as the pads for those are fine.

Issue has been fixed on Rev. 2.5 PCB, no need to apply the fix to that PCB.

The pads on the other side of the PCB are fine, no need to apply the fix to the other half.